We all know that miter saws are a great general-purpose tool for rough cutting several different types of materials, but they can also be used for other delicate types of work such as doing the trim on the inside of a house or making a picture frame. You can visit https://www.discoveriesla.com for more information about miter saws.
Follow these 5 miters saw pro tips and tricks which I listed below for easier and better results!
5 Miter Saw Pro Tips And Tricks
1. Use Stop Block
The best way to operate your miter saw effectively is to use a stop block.
Creating a stop block is easy, you just need to measure the length of the workpieces and then attach a piece of wood to the fence. Now you can overlap them and start cutting right next to the stop block and the length of each piece will be equal.
2. Make An Extension Fence
What if there is no space for clamping the stop block because your workpieces are longer than the length of your saw fence?
Worry not! All you need to do is to find a straight board and fasten it to the fence of your miter saw, then you can clamp a stop block anywhere you want.
3. Make A Zero Clearance Table
When you cut small pieces using a miter saw which has blades with a wide throat, not only sawdust but the workpiece fragments can drop and get stuck between your blade and cutting area.
To solve this problem, just place a piece of scrap plyboard on top of the table. And to keep it firmly you can tuck it underneath the extension fence along then screw them together or using tape.
4. Hold Small Pieces Without Using Your Fingers
To protect your fingers from the sharp blade when cutting small workpieces, Use anything long and strong like a ruler or a wooden stick instead to securely hold the tiny workpiece in place.
5. Cut To A-Line
If you want to cut a piece of wood with the exact length as calculated, use a measuring tape and draw a line on the board. Then cut it to the edge of the drawn line, not right in the middle because this could make your board shorter than you expected. That happens because the thickness of the saw blade will create an extra gap after cutting.
These miter saw tips and tricks above are practical and easy to apply for even the novice. I hope you have found some interesting things here that you might be able to use in your workshop or make improvements on some of the things that you’ve made.
Still don’t know where to invest in quality miter saws to get the best products? Here are some awesome suggestions at https://www.discoveriesla.com/best-table-saw-miter-gauge. Don’t stress, just do your best and good luck!