How the Table Saw Kickback Injuries Occur and How to Fix It?

Most of the saw table injuries directed arose from kickback. We are here to help you know how the table saw kickback injuries occur and how to fix it?

When talking about a portable table saw, it is one of the devices that are frequently used in the carpentry workshop. Since these machines operate at high capacity and fast rotation speed, there is a high likelihood that you will get into unexpected accidents or risks if handling them carelessly.

Therefore, we will provide you with useful information about how the table saw kickback injuries and how to fix it in this article. Let’s check them out!

How the Table Saw Kickback Injuries Occur and How to Fix It

How table saw kickback injuries occur?

As wood is set against the fence and pushed over the table saw into the sharp edge, it can start to lose pressure against the wall.  The wood gets captured on the saw’s posterior and is immediately snapped toward the path the edge is turning (towards you).

Kickback is an accident that often happens to people using table saws, especially those who are not proficient in handling wood saws. Therefore, it is easy for the blade to cut into your hand, the saw gets damaged, or endangers others around you.

How to fix it?

Here we will list useful tips for you to avoid unnecessary risks:

1. Use a Riving Knife

It’s advisable to have a riving knife with you while working. A riving blade is a wellbeing gadget introduced on a table saw utilized for carpentry. Joined to the saw’s arbor, it is fixed comparative with the sharp edge and moves with it as cutting edge profundity is balanced. 

If something tries to pinch on the back of the knife blade, it will strike the riving knife and not the spinning blade.

Adding a riving knife for table saw safety

2. Use a splitter

If you do not use a riving knife, you can use a splitter instead. Splitters are not as good as riving knives because they don’t raise and lower with the edge. 

A splitter allows you to cut with the cutter fully extended; and you drop the knife to cut like 3/4 inch material later. Behind the blade in the splitter, there is a wider gap that will protect you from dangers.

3. The blade and the fence of your table saw should be paralleled

A fence that isn’t adjusted consummately with the edge can enormously expand the danger of the table saw kickback by calculating the stock’s development towards the border’s rear.

Therefore, it’s very important to check every once in a while and ensure that the fence and the blade are parallel to the slot.

4. Use A Push Stick

To avoid your hand coming into contact with the blade when using a table saw, you can use a push stick or a push block. You can be certain that your hand won’t get brought into the sharp edge on the off chance that kickback occurs. Also, a push stick will go about as a kickback counter-measure since it gives you better control.

5. Remove the waste before proceeding

After performing each cut, you should remove the waste before proceeding. This will help reduce hazards like a small piece of wood getting caught on the blade and hitting your body. 


In this article, we have provided you with information about how the table saw kickback injuries occur and how to fix it. Kickback is a very dangerous event for you and those around you. 

Being a novice, you should pay attention carefully while using a saw. It’d be better to prioritize using one of the beginner table saws at Hope our articles are useful to you!

How Much Should You Pay For A Chef Knife?

chef knife price ranges

So, you’re thinking about buying a new chef knife? The truth is, a chef knife is a necessary equipment that you will need in your kitchen. But in order to bring home a good one, you will need to know which of the models you’re considering is the best bet.

And one of the most important factors that can determine how good a chef knife is is the price. And for the price range, you can expect to pay somewhere between $30 to $300 or even more for a good knife.

For chef knives that are below $30, there won’t be many choices for you to choose from. These knives are often not that long-lasting. And you should expect to replace them soon when their time comes.

From $30 to below $50, you will find some decent knife choices. I’m talking about some good ones from brands like Mercer Culinary, Augymer, etc.

These chef knives below $50 are also very balanced in terms of quality and longevity. And that’s why I highly recommend you take a look at the knives that have price tags in this range first.

From $50 to under $100 in price, you now proceed to the realm of the real deals when it comes to chef knives. Dalstrong, Zelite, Victorinox, etc. are the brands you should expect to see here.

And let me tell you this. You can pick up ANY of those chef knives and rest assured that they will be great choices for your budget.

Got some money to burn? Then why not pick up a good chef knife below $150? Or even below $300 if you want something that can make your friends “wow” whenever they visit your kitchen.

For the chef knives of these price ranges, you should expect something luxurious and often comes in the form of Damascus steel decoration as well.

The quality and longevity of these knives are unquestionable. Therefore, you won’t have to sweat it if you intent to use your knives in the long run.